Rubber edge trim and clamping profiles
In the wind industry, rubber edge trim and clamping profiles are used to finish sharp steel edges in wind turbines. This will prevent damage to pipes and cables and provides a safer working environment for service engineers. Ridderflex supplies profiles in different types, in standard sizes and only in commercial quantities.
Application of rubber edge trim and clamping profiles
Edge profiles and clamping profiles are different types of profiles, but both terms are used. A rubber edge trim or edge profile is clamped to protect a sharp steel edge. A clamping profile has, besides the clamping application, also a sealing function by means of an additional air chamber or a lip seal. This profile can be used in doors and hatches. Placement is easy, because the metal insert gives it a self-clamping effect.
Various types
Our profiles are made of PVC (standard) and have a metal insert.
Rubber edge trim
| Material | PVC |
| Clamping range | Depending on the type from 0.5 mm to 9 mm |
| Roll length | Depending on the type 50 to 100 metres |
Clamp profile
| Material | PVC + sponge rubber or PVC + rubber |
| Clamping range | Depending on the type from 1 mm to 10.5 mm |
| Roll length | Depending on the type 25, 30 to 50 metres |
We supply these profiles in standard sizes and only in commercial quantities.
Advantages of our rubber edge trim and clamping profiles
The flexibility and the metal insert of these profiles provide several advantages:
- easy to (re)place;
- long life span of the product;
- contributes to a safer working environment and
- absorbs movements (clamp profile).
Profiles in commercial quantities for the wind industry
Ridderflex supplies edge profiles and clamp profiles in various types. We supply them in standard sizes and only in commercial quantities. We are happy to advise you about all the possibilities. Please contact our Sales Department!
Question? Enquiry?
We excel in the production of custom-made plastic, rubber and polyurethane products.
